- Auto Focusing
- for CCTV Zoom Lens
- for Thermal Imaging Zoom Lens
- for Thermal Imaging Motorized Focus Lens
- CVBS(NTSC / PAL) Analog Input 720 x 480 (D1) and Output
- 2 Types of Lens Control
- Motor Control for Motorized Lens
- Thermal Imaging Zoom Lens Control through RS422 Serial Interface - Controlled by Pelco-D protocol on RS485 serial communication
- 256 Address ID available
- RS485 Communication with User Control Center or User PC
(1) For Focus Control of CCTV Zoom Lens
Item | Contents | |
Auto Focus Mode | - Auto Focus after Zoom - One shot AF |
|
Input Focus Motor Voltage | DC 4V ~ DC 20V | |
POT(Potentiometer) Interface | - POT_GND - POT_DC Voltage Output (DC5V) - POT_FOCUS_Wiper (Error) |
|
External Focus Control Line Input | - Available of External Focus Near and Far Line Input - For Main PTZ Driver - For Relay Operation Relay Normally Closed to PTZ Driver Focus Line. Focus usually is controlled by PTZ Driver. When received AF command, Relay open PTZ Driver Focus Line and Closed to Lens Focus Line of AF module. "Caution" It can be used the External Focus Line If Focus Voltage of PTZ Driver is same Input Focus Motor Voltage. |
|
Image Input | - Analog CVBS Input (D1, 720x480) - NTSC or PAL |
|
Communication | RS-485 (Pelco-D Protocol) | |
ID for RS485 | - Set using Binary DIP Switch (RS485 ID set, 0 ~ 255) |
|
Connectors | - Image Input and Output: BNC Connector |
|
LED Display | Power LED, Operation LED) | |
Power | DC 12V | |
OperatingTemperature | -40℃ ~ +85℃ | |
Size | 12.5 (W) x 2.6 (H) x 6 (D) (unit: cm) | |
(2) For Thermal Imaging Zoom Lens Control through RS422 Serial Communication
Item | Contents | |
Auto Focus Mode | - Auto Focus after Zoom - One shot AF |
|
Zoom and Focus Control by Serial Interface |
- RS-422 Communication with Lens Controller |
|
Image Input | - Analog CVBS Input (D1, 720x480) - NTSC or PAL |
|
Communication | RS-485 (Pelco-D Protocol) | |
ID for RS485 | - Set using Binary DIP Switch (RS485 ID set, 0 ~ 255) |
|
Connectors | - Image Input and Output: BNC Connector - Communication: Terminal Block -Power: Terminal Block |
|
LED Display | Power LED, Operation LED | |
Power | DC 12V |
|
OperatingTemperature | -40℃ ~ +85℃ | |
Size | 12.5 (W) x 2.6 (H) x 6 (D) (unit: cm) | |
(3) For Focus Control of Thermal Imaging Motorized Focus Lens
Item | Contents | |
Auto Focus Mode | - Auto Focus after Zoom - One shot AF |
|
Input Focus Motor Voltage | DC 4V ~ DC 20V |
|
Focus Motor Interface | - Focus Far - Focus Near "There is usually no Potentiometer on Thermal Imaging Motorized Focus Lens." |
|
External Focus Control Line Input | - Available of External Focus Near and Far Line Input - For Main PTZ Driver - For Relay Operation Relay Normally Closed to PTZ Driver Focus Line. Focus usually is controlled by PTZ Driver. When received AF command, Relay open PTZ Driver Focus Line and Closed to Lens Focus Line of AF module. "Caution" It can be used the External Focus Line If Focus Voltage of PTZ Driver is same Input Focus Motor Voltage. |
|
Image Input | - Analog CVBS Input (D1, 720x480) - NTSC or PAL |
|
Communication | RS-485 (Pelco-D Protocol) | |
ID for RS485 | - Set using Binary DIP Switch (RS485 ID set, 0 ~ 255) |
|
Connectors | - Image Input and Output: BNC Connector |
|
LED Display | Power LED, Operation LED | |
Power | DC 12V | |
OperatingTemperature | -40℃ ~ +85℃ | |
Size | 12.5 (W) x 2.6 (H) x 6 (D) (unit: cm) | |
TEL. +82-2-3012-8192 FAX. +82_2-2179-8198 E-mail. info@irken.co.kr No. 1002, Beobwon-ro, Songpa-gu, Seoul, 05855, South Korea
Copyright © IRKen. All rights reserved.